Backup power supply 1000 VA / 700 W 12 V KEMOT PROsinus

The KEMOT PROsinus backup power supply is designed for automatic backup power for devices during a mains outage. Thanks to the pure sine wave output, it is suitable for circulation pumps, computers, emergency lighting, security systems and other compatible devices.

When mains power fails, the backup power supply automatically switches to power from the connected battery. Once power is restored, it switches back to mains operation and starts charging the connected battery at the same time.

A 12V lead-acid battery is connected to the device according to the required backup time. You can use a lead-acid battery with liquid electrolyte, a gel battery or an AGM battery. The battery is not included.

The operating status is shown on the front LED display, and the device also features an acoustic fault or error signal.

Technical specifications:
Rated power: 1000 VA / 700 W
Battery: 12 V DC
Maximum battery voltage: 15 V DC
Recommended battery capacity: approx. 26–200 Ah
Battery charging current: max. 10 A
Input voltage range: 180–275 V AC
Input frequency: 45–60 Hz
Output voltage: 230 V AC ±8 %
Output frequency: 50/60 Hz ±0.5 Hz
Output voltage waveform: pure sine wave
Efficiency: ≥85 %
Switch-over time to battery: ≤4 ms
Operating temperature: 0–40 °C
Permissible humidity: 10–90 %
Dimensions: 14.5 × 18 × 34 cm
Weight: 6.95 kg

Protection functions:
Protection against overload, short circuit, overvoltage and undervoltage.

Backup time examples:
Consumption 100 W: battery 65 Ah – approx. 3.5 hours, 120 Ah – approx. 6.5 hours, 150 Ah – approx. 8 hours.
Consumption 200 W: battery 65 Ah – approx. 2 hours, 120 Ah – approx. 3 hours, 150 Ah – approx. 4 hours.
Consumption 300 W: battery 65 Ah – approx. 1.5 hours, 120 Ah – approx. 2.5 hours, 150 Ah – approx. 3 hours.

Package contents:
KEMOT PROsinus backup power supply
Battery is not included.