Multimeter for Electric and Hybrid Vehicles BM2805CSE

Brymen BM2805CSE is a modern digital multimeter designed specifically for work in environments with high electromagnetic interference, such as electric vehicles, hybrid vehicles, frequency converters or industrial drives. Thanks to dual EMI shielding, True RMS technology and fast automatic range switching, it provides accurate measurements even with distorted voltage and current waveforms.

The instrument offers measurement of DC and AC voltage up to 1000 V, current up to 10 A, resistance, capacitance, frequency and continuity. It also includes non-contact and contact voltage detection NCV/EF, voltage measurement on frequency converters (VFD), MAX HOLD, REL, Data HOLD with Hold-Alert™ notification, a backlit display and intelligent automatic power off. With safety category CAT III 1000 V / CAT IV 600 V, it is suitable for work on modern electrical installations and high-voltage electric vehicle systems.

Specification:

• Display: 3 5/6 digits, max. indication: 6000
• Sampling rate: Nominal 5 times/s
• Operating temperature: -10°C ÷ 50°C
• Relative humidity: Max. 80% up to 31 °C, then linearly decreasing to 50% at 50°C
• Operating altitude: Below 2000 m above sea level
• Storage temperature: -20°C ÷ 60°C, relative humidity < 80% (without battery)
• Temperature coefficient: 0.15x (specified accuracy) / °C for temperature. -10°C ÷ 18°C or 28°C ÷ 50°C, unless otherwise stated
• Measurement mode: True RMS
• Pollution degree: 2
• Safety (measurement category): Double insulation according to IEC/UL/EN/BSEN 61010-1 Ed.3.1, IEC/UL//EN/ BSEN 61010-2-033 Ed.2.0, IEC/UL/EN/BSEN 61010- 031 Ed.2.0, CAT III 1000V AC/DC, CAT IV 600V AC/DC measurement category
• Overvoltage protection:8 kV (1.2/50 µs)
• Electromagnetic compatibility: According to EN61326-1:2013
• Input protection: µA &mA: 0.63 A/1000V DC/AC, IR 10kA or better, Type A fuse: 11A/1000V DC/AC, IR 20kA or better, Type V fuse: 1100V DC/AC rms mV, Ω and others: 1000V DC/AC rms
• Battery low indication at approx. 2.5 V
• Power supply: 1.5V AAA batteries – 2 pcs.
• Typical current consumption 3.2 mA
• iAPO mode consumption 10µA typical
• Auto power off (iAPO) After approx. 32 min idle
• Dimensions (W x D x H) 97x55x198mm (W x D x H) (with holster)
• Weight 430 g
• Included: Test leads (pair), user manual Bkp60 – K-type temperature probe with double banana plug (BM2807CSE only)