Plastic welding staples type M – external corner 0.6 mm 100 pcs

Type M plastic welding staples with a diameter of 0.6 mm are designed for strong reinforcement of cracks and damaged areas on external corners of plastic parts. The special corner shape makes it easier to place the staple precisely in the repair area and helps strengthen the joint in places where standard straight or wave staples are less suitable.

The staple is inserted into the electrodes of a compatible plastic welder and is heated by electric current in a short moment. It is then pressed into the surface of the plastic part. After cooling, it remains fused inside the material and creates a strong metal reinforcement that limits further crack propagation and increases the mechanical resistance of the repaired area.

The M shape is especially suitable for external corners, edges and bent sections of plastic parts. The staples can be used when repairing car bumpers, motorcycle fairings, headlight brackets, covers, mounts, plastic containers, garden equipment and various technical and consumer products.

The 0.6 mm wire diameter also allows use on thinner plastic parts where precise control over the fusion depth is needed. After the repair is completed, the protruding ends of the staple can be cut off with pliers. The surface can then be sanded, filled or welded over with a suitable plastic welding wire.

For a strong bond, we recommend cleaning and degreasing the repaired area in advance. Do not push the staple all the way through the plastic part. Ideally, it should be fused approximately into the center of the material thickness. For longer cracks, we recommend using more staples at regular intervals.

Main benefits

• M shape designed for external corners
• 0.6 mm wire diameter
• Strong reinforcement of damaged plastic
• Limits further crack propagation
• Suitable for edges and bent sections
• Fast and easy application
• Precise fusion into the repaired material
• Suitable for professional and home repairs
• Use with compatible plastic welders

Possible uses

• Repair of external corners of plastic parts
• Repair of car bumpers
• Repair of motorcycle fairings
• Repair of brackets and mounts
• Repair of headlight covers
• Repair of plastic edges
• Repair of technical covers
• Reinforcement of cracks and broken areas
• Repair of plastic products at home and in the workshop

Technical parameters

• Staple type: M
• Design: external corner
• Wire diameter: 0.6 mm
• Intended use: reinforcing and repairing plastic parts
• Use: plastic welders with fusion staples

Recommended use procedure

1. Clean and degrease the repaired area.
2. Insert the staple into the electrodes of the plastic welder.
3. Place the staple on the external corner or crack.
4. Activate heating and slowly press the staple into the plastic.
5. Release the switch and let the joint cool briefly.
6. Remove the welder and cut off the protruding ends.
7. Sand the surface if needed or finish it with welding wire.

Warning

When working, use protective glasses and gloves. Heated staples reach high temperatures. Before repairing, we recommend testing the welder settings on less visible areas or on a sample of the same material.